Automated Lighting Made Simple, Easy and Efficient
With over 20 years’ experience installing, maintaining and upgrading C-BUS lighting solutions, CustomLink can advise you on the best solution for your fitout.
The innovative C-BUS lighting system controls lighting, powerpoints, blinds, fans and motors/pumps. This means you can turn on lights, close blinds and even switch on your fish tank pump from one control system.
The key features of C-BUS lighting include the following:
Auto-adjust lighting level
Automatically turn on lights when movement is detected
Automatically open/close blinds to a pre-set schedule or when there are changes in the external light level (i.e. at sunset)
A single light can be controlled from many locations
All the lights can be controlled from one single button
Multiple devices can be switched on with the touch of a button
Contemporary soft-touch switches
All lights/devices can be controlled from anywhere when you’re away from home, using your Smartphone, Tablet or laptop.
Best of all, you can change the way all the lights are controlled as often as you want, without changing the wiring. Because C-BUS overcomes the problems with using conventional wiring. No point-to-point wiring is required. All input and output units are looped together with a single cable and don’t have to be connected in any order. This means the lighting can be reprogrammed easily.
C-BUS integrates seamlessly with our Intelligent Security System and RTI AV control processors, which means the system provides security, convenience and saves energy. If you want to install C-BUS to a new home or refit your existing conventional lighting, then call CustomLink.
Turn lights on or off remotely via your mobile phone or computers. Set timers to automatically switch lighting on/off throughout the day or evening.
Control sections of lights or an entire home, warehouse or office floor with your lighting program. This can be controlled with a single wall button or via remote control.
Automatically adjust lighting levels depending on the external lighting requirements, such as dimming lights during high sunlight and increasing lighting when it gets darker.
Ready for integration
Synchronise your C-BUS lighting with your automation system to control blinds, lights, alarms, sensors, home theatre, music… turn your home into a smart home.
The SHAC controller replaces the Schneider C-BUS touch screens and other automation controllers, as they are no longer being manufactured.
This unit allows you to control your entire C-BUS system from your mobile phone and laptops with a fully customised and easy-to-use user interface.
Up to 8 family members or guests can have their own favourite lighting controls with the SHAC Controller system or up to 50 users for the NAC Controller system.
Introducing the C-BUS Automation Controller SHAC
a remarkable hardware choice to add to your system
You can have lots of lighting sequences preprogrammed in the controller. These can be triggered from your wall light switches, your mobile phones or by pre-set schedules.
You can easily change the schedules for turning the pre-programmed lights on/off.
You can convert your iPad into a touch screen on the wall by installing an iPad wall bracket or we can supply a 10" inch tablet complete with a retractable wall bracket pre-configure to work with the SHAC by Schneider.
Additional benefits if you have an M1 Alarm System (click here to download brochure)
By adding a C-BUS Interface, you can have the system programmed for the lights to turn on automatically when your existing alarm sensor detects movement.
If you also add a Voice Interface, this will allow you to control your lights via Siri, Alexa and/or Google Home.
Many more features can be added to your system with additional programming and/or interfaces. Refer to the Intelligent Security system for additional features.
For Reliable, Innovative and Peace of Mind Security
CustomLink provides new installations, upgrades, repair and replacement services throughout Brisbane.
To find out about using an integrated security or C-BUS system, contact us on 1300 122 520 or call Lee direct on 043 0088 224.
Lee Ngo - the founder
Mobile: 043 0088 224
more than 20 years of combined experience in security and automation